【Product name】
Diagnostic Kit for Interleukin-6(Immunochromatographic assay)
【Packing specification】
25 Tests/kit
【Intended use】
The kit is used for quantitative determination of Interleukin-6
(IL-6) in human whole blood, plasma and serum.
Interleukin 6 is a member of the family of interleukins. It plays
an important role in the inflammatory response and is a sensitive
indicator for the early diagnosis of acute infection.
【Components】
| Name | Quantity | Component |
| Test cards | 25 | It is composed of fluorescent pad (coated with
fluorescently-labeled IL-6 monoclonal antibody), nitrocellulose
membrane (coated with IL-6 monoclonal antibody and Goat anti mouse
IgG antibody), absorbent paper and backing. |
| Sample diluent | 25 (0.3mL/ tube) | Phosphate buffer |
| ID card | 1 | With specific stand curve file |
The components in different batches of kits cannot be used
interchangeably.
【Storage conditions and validity】
The kit should be stored at 4℃~30℃, out of direct sunlight. It is
valid for 18 months. The test card should be used within 15 minutes
after unsealing under the environment of 15℃~30℃ and 20% ~ 90%
relative humidity.
The production date, batch number and expiration date are shown in
the outer package of the product.
【Applicable instrument】
NIR-1000 dry fluoroimmunoassay analyser produced by WWHS Biotech.
Inc.
【Test procedure】
- Before the test, please read the instructions completely. If the
test card and sample are stored in cold storage, they should be
balanced at room temperature (15-30)℃ for not less than 30min
before use.
- Start NIR-1000 dry fluoroimmunoassay analyser according to the
instruction manual of the instrument, and carry out quality control
verification according to the instruction manual of the
instrument(Note: the reagent has been calibrated in advance, and
the calibration curve parameters of each batch of reagent have been
stored in the ID card. The test can be carried out only after the
quality control is passed. Otherwise, the cause should be found out
before testing.)
- Remove the test card from the aluminum foil bag and use it within
15 minutes.
- Place the test card on a clean horizontal table and mark it
horizontally.
- Mix 100 µL of patient sample with 300µL of sample diluent. Apply
100 µL of diluted samples to the well of the test card.
- Insert the test card into NIR-1000 dry fluoroimmunoassay analyser,
read and record the results at 10 minutes after addition of
samples, then dispose of used test appropriately.
【Reference interval】
The normal reference value is less than 10pg/mL in this assay. It
is strongly recommended that each laboratory should determine its
own normal and abnormal values.
【Performance】
1. Limits of detection
No higher than 5.00 pg/mL.
2. Accuracy
The relative deviation from the target value is limited to ±15.0%.
3. Repeatability
The within and between assay coefficient of variations are within
15.0%.
4. Linearity range
Within the linear range (5.00~ 4000.00)ng/mL, the linear
correlation coefficient R≥0.990.
FAQ
Q1: Are you trading company or manufacturer?
A1: We are manufacturer.
Q2: Do you provide samples ?
A2: Yes,we do provide samples.If you need it, please contact us.
Q3: How about the quality?
A3: We have the best professional engineer and strict QA and QC
system to ensure you get high quality products from us.
Q4: How’s the package?
A4: Normally are cartons, but also we can pack it according to your
requirements.
Q5: How’s the delivery time?
A5: It depends on the quantity you need.
